A pedal generator for a chainless bike or human power – electric serial hybrid. Easy to build DIY project presented by Thomas Senkel. Free Plans for aluminum parts included.
A Keyde front hub motor is used as a generator. It is nominal rated with 160 rpm @ 36 V and 250 W. You dont need any electronics, just a 3 phase bridge rectifier. The lithium ion battery is 12s (44 V) and 2x 25 Ah. The motor power is up to 5 kW.
Free Music Archive: Graphiqs Groove – Deep Sky Blue
source
Es de bajada
viewer 1,164,575
If he were to incorporate a freewheel bearing on the crank and a secondary sprocket on the generator to the drive wheel he would in fact have regenerative braking allowing power to be generated while the trike is coasting as well as when pedaling.
Strefy zgniotu ??
Wonderful. Please let us know have you used Charge controller for battery charging or direct connection from rectifier.
Nice
Die Ausführung ist einfach so perfekt, die ganzen schönen Drehteile, geschweißter Alurahmen, eigens gebauter Motor. Unglaublich!
Free Plans for aluminum parts included. where do i get the plans?
Love jugad
thanks bosh
Show perfeito muito bom seu projeto
Good Production. You can also See 35KW FREE Electricity Generator. https://goo.gl/kUVQNc
Hadisenin ve Aleyna Tilki.nin ifşası cıkmıs oha :O
Super
Was that a re-wound Fisher & Paykel washing machine motor that is being used as the run motor ?
This guy needs to make this as a kit, but possibly can be done by anyone, need to give instructions, or DL the video and look closely,,lol.
Would the flanges need to be lathed off, not too sure if that needs to be done if the brackets were made to suit , as that possibly replacing the charging motor/generator for another type/brand and making the mounting brackets bigger or smaller, depending on the charge needed for the running motor.
Leave flanges on, so as to add weight and use the spoke holes as to be mounts for that, the motor can be mounted any place, even abouv the the peddles as the distance of the chain being small is the only real factor, that the removal of the flanges are not really needed to be done, just makes it look sexy all smooth like a,,,, um yeah.
OK so can you add regen braking?
please trike bike plans.thanks
Im #1
great
como adquirir esse produto
https://www.youtube.com/watch?v=wvmphkQvWJU
Ein Pedalgenerator für ein kettenloses Fahrrad oder eine menschliche Leistung – elektrischer serieller Hybrid. Leicht zu bauendes DIY-Projekt von Thomas Senkel. Kostenlose Pläne für Aluminiumteile enthalten.
Ein Keyde-Frontnabenmotor wird als Generator verwendet. Es ist nominell mit 160 U / min bei 36 V und 250 W bewertet. Sie brauchen keine Elektronik, nur ein 3-Phasen-Brückengleichrichter. Die Lithium-Ionen-Batterie ist 12s (44 V) und 2x 25 Ah. Die Motorleistung beträgt bis zu 5 kW.
wo kann ich das kaufen
where did you buy the Generator from ??
There should be some protection to your leg if you crashed any where so plzz build a. Guard or a nose of a car
I love it. It is just what i need for my E-Trike. How much does it cost?
Very impressive!